Once the correct password is entered, you will have access to the COnF (Configuration) and OPt (Options) folders, allowing you to modify setpoints, differential values, and sensor configurations.
Disclaimer: Ensure you are familiar with local regulations and safety requirements. The Eliwell SMP5500
The SMP5500 supports 3 analog inputs (NTC/DI), 6 digital inputs, and 5 digital outputs, allowing for complex HVAC management and specialized industrial logic.
Supports TTL, RS485, and LAN for connection to expansion modules or remote terminals like the SKP/SKW series . eliwell+smp5500+password+exclusive
When attempting to enter the —especially to adjust the PAr/COnF (Configuration) or PAr/OPt (Operating) parameters—the controller will prompt for a security code. 1. The Default/Common Password
is a built to run customized algorithms written in IEC 61131-3 languages via Eliwell FREE Studio. Core Technical Specifications Physical Format : 32x74x80mm panel mounting layout. Power Supply : 12...24Vac or 24Vdc options.
Once the PA2 menu is accessed, the fundamental behavior of the controller can be adjusted to meet specific site requirements. Once the correct password is entered, you will
Use the UP or DOWN keys to scroll until you find the PASS label.
For information regarding specific model suffixes or default configurations for newly installed units, consulting the technical datasheet associated with the specific part number is recommended. Support for password recovery or factory resets should be directed to authorized Eliwell service centers to ensure system integrity.
850 words
Use and DOWN buttons to enter the numeric code (Default is often 27 for Level 1, but may vary by application).
This allows changes to the operational behavior, such as: St1: Setpoint 1 (primary temperature control). dIF: Differential or Hysteresis. dEF: Defrost parameters (type, interval, duration).
programmable controller features a specialized security and customization architecture that distinguishes it from standard "fixed" controllers. While traditional controllers use static passwords, the Supports TTL, RS485, and LAN for connection to
