According to typical product data sheets, Nalco 73385 possesses the following characteristics: Liquid, appearing colorless to yellow. Odor: Pungent or sweet.
: It eliminates a wide array of microorganisms, particularly those that produce insulating slimes or generate corrosive metabolic byproducts (such as hydrogen sulfide from sulfate-reducing bacteria).
Move the exposed individual to fresh air. If breathing is difficult, administer oxygen (by trained personnel). If breathing stops, perform artificial respiration. Seek immediate medical attention.
(functions.RelatedSearchTerms)
The water and chelating agents are generally low toxicity, but the concentrated molybdate solution is alkaline (pH between 11.5 and 13.0), which drives the corrosive classification.
This article focuses on the safety data sheet for a specific product: , a water treatment chemical manufactured by Nalco Water, now a subsidiary of Ecolab. While the official SDS for Nalco 73385 may not be directly available online, this guide will provide a thorough analysis based on publicly available procurement data, information on similar products, and general guidelines on how to interpret and obtain safety data.
Safety Data Sheets (SDS), formerly known as Material Safety Data Sheets (MSDS), for Nalco Water products are generally online. To obtain the official document, you must:
Section 1 of the Safety Data Sheet establishes the identity of the chemical and its manufacturer. Nalco 73385 is developed by Ecolab’s Nalco Water division, a leader in water treatment solutions. Nalco™ 73385 Manufacturer: Nalco Water, an Ecolab Company
Use water spray, foam, dry chemical, or carbon dioxide ( CO2cap C cap O sub 2 ) appropriate for the surrounding fire.
Spills must be managed immediately to prevent environmental contamination and slip hazards.
The SDS often omits specific glove breakthrough times – typically >480 minutes for nitrile (per Ecolab internal data).