Sumitomo F50 Compressor Manual Page

Stay informed, stay safe, and get the most out of your Sumitomo F50 compressor!

The gas passes through an Adsorber (active charcoal layer) to ensure high purity before being sent back to the cold head via the supply line. 3. Installation & Safety Guidelines

High side ~2.0 to 2.3 MPa; Low side ~0.5 to 0.7 MPa Weight: Approximately 120 kg (264 lbs) 2. Unpacking, Installation, and Setup sumitomo f50 compressor manual

Helium gas contamination (e.g., air or moisture in the system).

Supports 3-phase 380/400/415V at 50 Hz and 460/480V at 60 Hz. Specification Power Consumption 6.5–7.2 kW (50 Hz); 7.5–8.3 kW (60 Hz) Physical Dimensions 591 x 450 x 585 mm (approx. 23.3" x 17.7" x 23") 120 kg (approx. 264 lbs) Maintenance Cycle 30,000 hours (improved over previous series) Cooling Requirement Water-cooled; 7–10 L/min (1.8–2.6 gal/min) Operational Workflow Stay informed, stay safe, and get the most

Minimum of 6 to 9 liters per minute (L/min) depending on inlet water temperature.

The F-50 is designed for long intervals between maintenance, but adherence to the schedule is crucial. Installation & Safety Guidelines High side ~2

Over time, minor gas loss may occur through micro-leaks in couplings. To add helium:

Cools both the compressed helium gas and the internal compressor oil using facility water. 2. Installation and Initial Setup