Rok Power Washer Instructions 【RELIABLE | OVERVIEW】

Verify the engine oil level is at the full mark and fill the tank with fresh, unleaded gasoline.

Starting procedures differ depending on whether you own a ROK electric model or a ROK petrol-driven model. For ROK Electric Power Washers

Switch back to high pressure and rinse thoroughly from top to bottom. 7. Shutdown Procedure Proper shutdown prevents damage to the unit: Switch OFF: Turn the ROK motor switch to "OFF" (0). Turn Water OFF: Close the water supply faucet. rok power washer instructions

Following the correct startup sequence prevents pump damage. A. Priming the Pump (Very Important) Ensure the pressure washer is . Connect the garden hose and turn the water faucet on fully .

Enhance your pressure washing experience with these compatible add-ons: Verify the engine oil level is at the

If storing the power washer in freezing temperatures, draw a pump saver fluid through the system. This lubricates the seals and prevents water from freezing, expanding, and cracking the internal pump manifold.

Securely attach one end of the high-pressure hose to the spray gun and the other to the water outlet on the machine. Following the correct startup sequence prevents pump damage

Follow these sequential steps to assemble and connect your ROK power washer properly. Step 1: Connect the Water Supply

Check the mesh screen inside the water inlet adapter regularly. Clean it under running water to remove trapped sediment.

: Connect the high-pressure hose to the trigger gun and attach the appropriate wand or nozzle.