: The most reliable driver is bundled within the Autocom software installation folder, typically found in the Driver/USB subdirectory. Official Support
Pro tip: The top drivers are usually based on FTDI chips (FT232RL). Verify this by opening your CDP case or using a USB viewer tool.
Visit mhhauto.com → Search “Autocom CDP USB Drivers top” → Look for a post by user “CDPMaster” from 2023 – his driver pack contains the top FTDI + CH340 hybrid installer.
You do not need to hunt on sketchy websites for the correct files. The top and safest way to get the driver is to use the files that come with your software installation: autocom cdp usb drivers download top
Click and navigate to the folder where you extracted the FTDI drivers or your Autocom software driver directory. Select the file named ftdibus.inf and click Open , then OK . Follow the prompts to finish the installation. Step 5: Install the Virtual COM Port
Autocom CDP diagnostic scanners rely on specialized USB-to-serial chips to transmit vehicle data to your computer. Most official and aftermarket Autocom CDP, CDP+, and Delphi DS150E multiplexers utilize FTDI (Future Technology Devices International) chips.
The safest method is to download the complete diagnostic software from the Autocom Official Releases Page . The USB drivers are typically bundled within the installation package for or TRUCKS software. 2. Verified Driver Repositories : The most reliable driver is bundled within
Plug the device into a USB port and open (Right-click Start > Device Manager). Look under “Other devices” or “Ports (COM & LPT)”. If you see “Autocom CDP” with a yellow exclamation, you need drivers.
Click and navigate to your software installation folder's driver directory (e.g., C:\Program Files (x86)\Autocom\Driver ).
Follow these steps to manually install or update your Autocom CDP USB drivers on Windows. Step 1: Connect the Hardware Connect the USB cable to your Autocom CDP main unit. Visit mhhauto
Make sure the downloaded file is a .zip or .exe containing:
folder within your main Autocom or Delphi software directory (e.g., C:\Autocom\Cars\Driver\USB Hardware Test : Once installed, open the software, go to Hardware Setup , and run a to confirm the COM port is active. System Compatibility : Optimized for Windows 11 with at least an Intel Core i5 and 4GB RAM. Legacy Support
Comprehensive Guide to Autocom CDP USB Drivers Download If you are using the Autocom CDP (Compact Diagnostic Partner)
🔁
: Licensed users can access full setup frameworks, security dongle utilities, and firmware tools straight from the technical hub on the Autocom Releases Page . How to Install the USB Drivers on Windows 10 and 11