Edmi Mk6n Genius User Manual __link__ Access

Battery-backed RAM and Flash RAM for non-volatile data storage.

Typically sealed by utilities to prevent tampering. When accessible, a long press triggers a billing reset or demands reset, pushing current data into historical memory registers. Communication Ports

The meter is designed for panel mounting. Ensure the panel cutout meets the specifications in the technical manual. Wiring Configuration: The

The Mk6N utilizes standard Object Identification System (OBIS) codes to categorize parameters: Parameter Description Total Active Energy Import 2.8.0 Total Active Energy Export 3.8.0 Reactive Energy Import 4.8.0 Reactive Energy Export 9.1.0 Current Local Time 9.2.0 Current Local Date 11.7.0 Instantaneous Phase A Current Amperes (A) 32.7.0 Instantaneous Phase A Voltage 5. Wiring and Installation Configurations edmi mk6n genius user manual

The meter uses CT (Current Transformer) connections. Ensure the CT polarity is correct to avoid "Negative Energy" errors.

If you are looking for the , this guide serves as a comprehensive overview of its core functions, installation procedures, and display navigation. 1. Key Technical Specifications

Supports IEC 62056-21, DLMS/COSEM, and sometimes Modbus. Battery-backed RAM and Flash RAM for non-volatile data

Class 0.2s or Class 0.5s (Active Energy per IEC 62053-22) Voltage Range: Nominal 57V57 cap V 240V240 cap V (Phase-to-Neutral), 3-Phase 3-Wire or 4-Wire configurations Current Range: CT Operated ( ) or Direct Connected ( Frequency: 50Hz50 cap H z 60Hz60 cap H z Enclosure Rating: IP54 (Dust and splash resistant) Operating Temperature: -20∘Cnegative 20 raised to the composed with power C +70∘Cpositive 70 raised to the composed with power C

The total vector combination of active and reactive power.

A configurable physical button is available for manual billing resets. Communication Ports The meter is designed for panel

The meter is equipped with a "Type 7" serial port, which includes power and dual RS232 channels. The "lower" serial port is typically designated as the SCADA port for integration with higher-level systems.

A short press cycles through the configured display sequence (e.g., moving from Date to Time, then to Total kWh).

Used for hardwired multi-drop networks, connecting multiple meters to a central SCADA or Building Management System (BMS). Ethernet/Modbus TCP: Allows direct network patching.