Press until OFF_1 appears and repeat the steps to set the time the device should turn off.
This is the core function of the timer, allowing you to automate your devices.
If you want your programs to work, you must cycle the indicator to AUTO . If your appliance is supposed to be on right now according to your schedule, set the timer to ON first, then switch it to AUTO . If it is supposed to be off right now, switch it to OFF first, then switch it to AUTO . Advanced Functions: Random and Daylight Saving Time (DST) chevron digital timer ew-32 pdf
Hold the button for at least 2 seconds until "SET" and the "HOUR" digits start flashing. Use UP or DOWN to adjust the hour.
Press and hold the button, then press the TIMER button. Press until OFF_1 appears and repeat the steps
: Plug the timer into a power outlet for approximately 14 hours before first use to charge the memory backup battery.
Tells the device to run your programmed ON/OFF schedules. Ensure it is set to AUTO for normal operations. Daylight Saving Time (DST) Mode If your appliance is supposed to be on
7 day electronic timer operating instructions - Sparks Direct
Locate the small, recessed button on the face of the timer. Using a paperclip or a pen tip, press and hold the button for 3 seconds. The screen will momentarily flash all characters and then clear to 00:00 . This clears any glitched data or conflicting schedules left in the memory. Setting the Current Time and Day