Handloader Ammunition Reloading Journal October 2011 Issue Number 274 [exclusive] ❲No Password❳
He breathed out. Squeezed.
A reader searching for "Pet Loads" in 2011 would turn to . Pearce has since become the torchbearer for Ken Waters' famous series, and his work in this issue likely focused on practical, field-tested loads for the average shooter, blending historical context with modern powder innovations. [4†L11-L14]
The reviewer’s primary complaint was that the article’s author had an overly narrow view of the 10mm landscape. The author reportedly cited only Glock and a “short handful” of 1911 makers as the primary sources for 10mm pistols, overlooking other significant manufacturers like Sig Sauer, EAA, and Rock Island Armory. Similarly, the reviewer argued that the article understated the variety of available factory ammunition, listing only a few offerings while omitting numerous loads from boutique manufacturers like Buffalo Bore, Cor-Bon, Double Tap, and Grizzly. This review serves as a potent reminder that no single source is infallible and that knowledgeable handloaders should always cross-reference information and consider the perspective of the author.
The world of ammunition reloading is built on technical precision, historical knowledge, and practical experience. For over five decades, Handloader magazine has served as a cornerstone publication for precision shooters and reloaders. The is a quintessential example of the in-depth technical analysis and reloading data that the publication is known for, offering insights that remain relevant to shooters today.
Issue 274 also featured contributions from the magazine's regular columnists, each a giant in the field of handloading. It's important to note that this issue was produced under the experienced editorial leadership of Dave Scovill. He breathed out
Beyond the technical data, the journal served as a guide for the daily operations of the reloading bench:
Long before lead-free primers became a regulatory talking point, examined the early innovations, shelf-life, and ignition consistency of environmentally friendly, lead-free primer compounds . Petty compared the stability of traditional lead styphnate primers against newer diazodinitrophenol (DDNP) formulations, highlighting the engineering hurdles manufacturers faced in replicating traditional ignition energy and sensitivity.
Long before high-end polymer-coated projectiles dominated the market, Handloader was the premier authority on bullet casting. Issue #274 features deep-dives into alloy chemistry (such as balancing lead, tin, and antimony) to achieve the perfect Brinell Hardness Number (BHN) for specific pressure thresholds. It tackles gas-check applications, bullet sizing tolerances, and lubrication formulas designed to eliminate barrel leading in vintage and modern firearms alike. Historical Context: The 2011 Reloading Landscape
Equally noteworthy were his warnings on pressure signs. Barsness stated emphatically that classic signs of over-pressure, such as difficult bolt lift or measurements of case head expansion, are not reliable indicators. Instead, he provided a clear and unambiguous benchmark: any handload that produces velocities exceeding published manual data is operating at an unsafe pressure level and should be abandoned immediately. Pearce has since become the torchbearer for Ken
Handloader #274 features detailed articles that cover a diverse range of cartridges and reloading techniques. The content is tailored for both the novice looking to understand the basics and the experienced reloader aiming for sub-MOA precision.
Handloader: The Ammunition Reloading Journal Issue No. 274 (October 2011), published by Wolfe Publishing, features detailed historical analyses, including Mike Venturino's look at Sharps Cartridges and Gil Sengel's examination of the 9mm Federal. The issue also includes columns from Dave Scovill, Charles E. Petty, Terry Wieland, and Brian Pearce covering topics such as primer use and high-performance handgunning. Back issues are available through the publisher’s website or secondary markets.
For specific content from Issue Number 274, I recommend:
: Comprehensive tracking of how seating depth and cup thickness variations alter the ignition curve of heavy-duty magnum propellants. Similarly, the reviewer argued that the article understated
The issue heavily details how newer, canister-grade powders behaved in varying thermodynamic environments. Authors evaluated the exact pressure curves, charge densities, and ignition efficiencies across different case capacities. Special emphasis was given to achieving high load-density percentages to limit internal erratic ignition—a fundamental key to reducing extreme spread (ES) and standard deviation (SD) in competitive rifle disciplines. 2. Deep-Dive Cartridge Load Data
A book that looks new but has been read. Cover has no visible wear, VERY FINE CONDITION-HIGH GRADEVERY. Books & Magazines > Books.
If there was ever a "cult classic" cartridge, the .280 Ackley Improved is it. The October 2011 issue dove deep into this wildcat-turned-standard. Long before Nosler standardized it with SAAMI specs, handloaders were fire-forming brass to get that 40-degree shoulder.